Intel 8XC196MC, 8XC196MD WG2 WK1, WG3 WK1, PWM0 WK0, PWM1 WK0, COMP54 WK1, Freqout WK1 Clkout

8XC196MC, MD, MH USER’S MANUAL

Table B-8. 8XC196MC and MD Default Signal Conditions (Continued)

Port Signals	Alternate	During	Upon RESET#
			Inactive	Idle	Powerdown
	Functions	RESET# Active
			(Note 14)
P6.3	WG2	WK1	WK1	(Note 13)	(Note 13)
P6.4	WG3#	WK1	WK1	(Note 13)	(Note 13)
P6.5	WG3	WK1	WK1	(Note 13)	(Note 13)
P6.6	PWM0	WK0	—	(Note 13)	(Note 13)
P6.7	PWM1	WK0	—	(Note 13)	(Note 13)
P7.1:0 (Note 15)	EPA5:4	WK1 (Note 1)	—	(Note 12)	(Note 12)
P7.3:2 (Note 15)	COMP5:4	WK1	—	(Note 12)	(Note 12)
P7.6:4 (Note 15)	—	WK1	—	(Note 12)	(Note 12)
P7.7 (Note 15)	FREQOUT	WK1	—	(Note 12)	(Note 12)
—	CLKOUT	CLKOUT active,	—	CLKOUT	LoZ0
		LoZ0/1		active, LoZ0/1
—	EA#	HiZ	—	HiZ	HiZ
—	EXTINT	HiZ	—	HiZ	HiZ
—	NMI	WK0	—	WK0	WK0
—	RESET#	LoZ0/HiZ	—	HiZ	HiZ
		(Note 2)
—	V PP	HiZ	—	LoZ1	LoZ1
—	XTAL1	Osc input, HiZ	Osc input, HiZ	Osc input, HiZ	Osc input, HiZ
—	XTAL2	Osc output,	Osc output,	Osc output,	(Note 7)
		LoZ0/1	LoZ0/1	LoZ0/1

NOTES:

1.These pins also control test mode entry.

2.If Disable Reset Out = 0, pin is LoZ0. If Disable Reset Out =1, pin is HiZ.

3.If EA# = 0, Port 3 and Port 4 = HiZ. If EA# = 1, Port 3 and Port 4 = ODIO.

4.If EA# = 1, pin is WK1. If EA# = 0, P5.0, P5.3, and P5.5 are configured as outputs and function as ADV#, RD#, or BHE# respectively.

5.READY function not selected and three wait states inserted to allow fetch of CCB.

6.BUSWIDTH function is selected.

7.If XTAL1 = 1, pin is LoZ0. If XTAL1 = 0, pin is LoZ1.

8.If P5_MODE.0 = 0, port is as programmed.

If P5_MODE.0 = 1 and CCR.3 = 1 (ALE mode), pin is LoZ0. If P5_MODE.0 = 1 and CCR.3 = 0 (ADV# mode), pin is LoZ1.

9.If P5_MODE.1 = 0, port is as programmed. If P5_MODE.1 = 1, pin is LoZ0.

10.If P5_MODE.y = 0, port is as programmed. If P5_MODE.y = 1, pin is LoZ1.

11.If P5_MODE.y = 0, port is as programmed. If P5_MODE.y = 1, pin is HiZ.

12.If Px_MODE.y = 0, port is as programmed. If Px_MODE.y = 1, pin is as specified by the associated peripheral.

13.If output port, pin is as programmed. If special function, pin is as specified by the associated periph- eral.

14.The values in this column are valid until your software writes to Px_MODE.

15.Shaded rows indicate those signals that are available only on the 8XC196MD.

B-24