102 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Operation
To set the Day of Week Modes:Table 12. Day of the Month - addresses
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 07.
3. Press the HOLD key. 8107-
System Mode displays
4. Enter 3.
5. Press the HOLD key. 3-
D of Week PTN displays
6. Press the HOLD key. 300 :
1st SUN Pattern displays
7. Enter pattern (0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 -
pattern 3) for the first Sunday.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key to store the entry. Next Day of Week mode displays
9. To set additional Day of Week modes, press the volume up
or down key or press the HOLD key to move to the d esired
mode.
Desired Day of Week mode displays
10. Repeat steps 7-9 until the remaining days in the month are
set.
Note: The entry positions are listed in Table 12 on page
102.
11. Press the AUTO key to exit the entry mode. 3-
D of Week PTN displays
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/ OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
ADDRESSES
FOR THESE
DAYS OF THE
WEEK:
-- DAY OCCURRENCE --
(e.g., 1st Sunday=address 300; 2nd Sunday=address 307)
1st 2nd 3rd 4th 5th
Sunday 300 307 314 321 328
Monday 301 308 315 322 329