Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 175
To assign a feature code or extension number to a one-touch key:
To check a programmed one-touch key:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.
Onhook Dialing
CPC-96, CPC-288, and CPC-576 All Versions
Description
Onhook Dialing is a standard feature for key telephones where you can dial onhook using the dialpad,
one-touch keys, or FF keys.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, pres s the fol lowing
keys AUTO * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Press the CONF key. C displays
3. Press the one-touch key to be checked. Programmed data displays
4. Replace the handset or press the ON/OFF key.