Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 89
Set Call-Forward ID Codes for Voice Mail
Description

(For a description of Call Forward ID codes for Voice Mail, see “Call Forward ID Code for Voice

Mail” on page 68.)

Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box for

storing messages. The actual entry needed will vary by voice mail systems and configuration. Often

the entry is the extension number.

Operation

To set the Call Forward ID code:

Hardware Requirements
•N/A
Related Programming
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 05.
3. Press the HOLD key. 8105-
C.FWD ID Code displays
4. Press the HOLD key. CF ID-EXT Numbe displays
5. Dial the extension number.
6. Press the HOLD key. CF-ID EXT XXX displays (where
XXX = extension number)
7. Enter the Call Forward ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or any existing data, press the FLASH key.
8. Press the HOLD key to store the entry. Next extension number displays
9. To set additional Call Forward ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
Desired extension displays
10. Repeat steps 7-9 until all Call Forward ID codes are set.
11. Press the AUTO key to exit the entry mode. CF ID-EXT Numbe displays
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off