Section 700 - Operation

Chapter 6. DSLT Features

Considerations

N/A

Intercom Calling

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

The System provides two methods of intercom calling:

Voice Calling: Extension calls are connected immediately, without a ringing tone.

Tone Calling: A ringing tone is sent to the called extension.

Extension Class of Service (COS) programming determines whether the default for the originating extension is voice or tone calling. Regardless of the default, you can toggle between voice or tone calling by entering the Tone-Voice Call feature code. For example, if the extension default is tone calling, you can make a voice call to another extension by entering the Tone-Voice Call feature access code.

Operation

To make a call using Intercom Calling:

 

Action

Result

 

 

 

1.

Lift the handset or press the ON/OFF key.

Intercom dial tone

 

 

 

2.

Dial the extension number.

 

 

 

 

3.

If your extension is set for tone calling and you want to

 

 

make a voice call, enter 1.

 

 

Or, if your extension is set for voice call and you want to

 

 

make a tone call, enter 1.

 

 

 

 

4.

Speak when your call is answered

 

 

 

 

5.

Replace the handset or press the ON/OFF key.

 

 

 

 

Hardware Requirements

N/A

Related Programming

FF1-0-03: Extension COS (Intercom Calling Type)

FF1-0-03: Extension COS (Voice Call Send)

FF1-0-03: Extension COS (Voice Call Receive)

FF3: Extension COS

Considerations

Both the called and calling parties must belong to an Extension COS that allows Voice Calling.

576-13-700

DBS 576 (USA), Revised 6/11/98

231

Page 231
Image 231
Panasonic 524X07801B manual DBS 576 USA, Revised 6/11/98 231