Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 263
To retrieve a transfered call park:
Hardware Requirements
•N/A
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• You cannot park more than one call at a time.
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
Call Pickup
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System allows the following types of call pickup:
• Extension Group Pickup
• Extension Direct Pickup
• Trunk Group Pickup
• Trunk Direct Pickup
Extension Group Pickup
Extension Group Pickup allows you to pick up a direct ringing call (within your extension pickup
group or in a different pickup group) without having to dial the number of the ringing extension.
Three types of Extension Group Pickup are available:
•Call Pickup - All Calls: You can pick up a call ringing anywhere within your own extension
group.
•Call Pickup - External Calls: You can pick up only external calls ringing within your own
extension group.
•Specified Group Pickup: You can pick up a call ringing to an extension in another extension
group.
Action Result
1. At the extension with the transfered park call , lift the hand-
set. Intercom dial tone
2. Enter Call Park Ans wer/Self access code (d efault 772). • Connected to parked call