Section 700 - Operation

Chapter 4. User Maintenance

Hardware Requirements

N/A

Related Programming

N/A

Considerations

N/A

Set Mode Schedule

Description

(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page 39.)

You can set the System to automatically enter None, Day 1, Day2, Night, Night (1), or Night (2) modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day. (This menu allows the setting of the patterns.)

Operation

To set the Mode Schedule:

 

Action

 

Result

 

 

 

 

1.

If not already in User Maintenance mode, enter User Main-

81-

 

 

tenance mode. (See “To enter User Maintenance mode:” on

User MAINT displays

 

page 75.)

 

 

 

 

 

 

2.

At the 81 level, enter 07.

 

 

 

 

 

 

3.

Press the HOLD key.

8107-

 

 

 

System Mode displays

 

 

 

 

4.

Press the HOLD key.

0-

 

 

 

Mode Schedule displays

 

 

 

 

5.

Press the HOLD key.

000

:HHMM

 

 

PTN 1-1 Start T displays

 

 

 

 

6.

Enter the start time in hours (two characters) and minutes

 

 

 

(two characters) for the Pattern 1 - first mode.

 

 

 

Note: To clear an entry or existing data, press the FLASH

 

 

 

key.

 

 

 

 

 

 

7.

Press the HOLD key.

001

:

 

 

PTN 1-1 Mode displays

 

 

 

 

8.

Enter the desired mode for Pattern 1 - first (0 - None, 1 -

 

 

 

Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).

 

 

 

Note: To clear an entry or existing data, press the FLASH

 

 

 

key.

 

 

 

 

 

 

576-13-700

DBS 576 (USA), Revised 6/11/98

91

Page 91
Image 91
Panasonic 524X07801B manual Set Mode Schedule, To set the Mode Schedule