Chapter 6. DSLT Features

Section 700 - Operation

Hardware Requirements

N/A

Related Programming

FF1-0-03: Extension COS (Call Forward/All/Busy/No-Answer and DND Cancel)

FF1-0-03: Extension COS (Call Forward/All Calls)

FF1-0-03: Extension COS (Call Forward/Busy)

FF1-0-03: Extension COS (Call Forward/No Answer)

FF1-0-03: Extension COS (Call Forward/Other)

FF1-2: Dial Plan

Considerations

Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For example, extension 220 can only forward to extension 225 if 225 is not forwarded.

If forwarding to an outside number, the destination number must be pre-programmed into a System Speed Dial (SSD) code.

Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.

You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other modes will remain set until canceled individually.

An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A manual camp-on to a busy extension will not forward.

If Call Forwarding No Answer and DND are both set, calls immediately forward to the Call Forward No Answer destination.

You can cancel both Call Forwarding and DND by entering 7 * *.

Call Hold

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

The system provides the following types of Call Hold:

System Hold

Floating Hold

Exclusive Hold

Broker’s Hold

Call Park (Station)

System Hold

You can place either an outside or intercom call on System Hold. You can retrieve a call placed on System Hold from any extension that has a line appearance for the held call.

214

DBS 576 (USA), Revised 6/11/98

576-13-700

Page 214
Image 214
Panasonic 524X07801B manual 214