Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 63
Related Programming
• FF2: Trunk Programming (Alarm Ringing)
• FF11-02: Slide/Alarm Ringing Timer
Considerations
• If slide ringing is enabled, it will override alarm ringing.
SSD TRS Override
Description
System Speed Dial (SSD) numbers may be used to outdial calls from extensions that otherwise have
outgoing call restrictions (i.e., Toll Restriction Service [TRS]).
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Station Message Detail Recording
Description
Station Message Detail Recording (SMDR) provides detailed call records of outgoing calls. SMDR
records can be output to a printer or an external call accounting system.
Various types of information are reported on the SMDR record and each type of information occupies
a set position in the SMDR format (See Figure 1 on page 64.) One type of information is the
“condition code” which occupies the first position in the output format. This code specifies what type
of call was made or received (e.g., DISA Incoming call [S] or Outgoing Network call [W]). However,
condition codes are prioritized, and the type of call determines what code is displayed.
The following tables shows the priority of condition codes for outgoing calls and incoming calls.
Table 7. Priority of outgoing call condition codes
Priority Condition
Code Description
Highest T or HT = Outgoing Transfer Call
H = Outgoing Hold Call
2nd FF = Call Forward Outside Call
3rd WW = Network Outgoing Call