Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 107
.Operation
To set a Caller ID Logging Extensions using either a large-display or small-display phone:Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 10.
3. Press the HOLD key. 8110-
CID Logging EXT displays
4. Press the HOLD key. CID Logging # displays
5. Enter log control number.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key to store the entry. Next log control # displays
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off