104 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set Call Forward Busy Destination Extension
Description

You can assign a Call Forward Busy Destination Extension for each extension. This is typically used

for forwarding calls to voice mail.

Operation

To set a Call Forward Busy Destination Extension using either a large-display or small-

display phone:

9. To set additional extension WalkingTRS Codes, press the
volume up and down key or press the HOLD key to move
to the desired Extension.
10. Repeat steps 8-10 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 09.
3. Press the HOLD key. 8109-
TRF of CFWD displays
4. Enter 0.
5. Press the HOLD key. CFWD-Bus
y
EXT # displays
6. Dial the extension number.
Action Result