232 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
• You cannot change from voice call to tone call.
Last Number Redial
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Last Number Redial allows you to automatically redial the last number dialed by pressing the
REDIAL key.
Operation
To automatically redial the last number dialed:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO calls, or CO calls only.
Message Waiting / Callback
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Action Result
1. Lift the handset or press the ON/OFF key.
OR...
Enter a trunk access code.
Outside dial tone (if trunk access code
entered)
2. Press the REDIAL key.
3. Complete the call and replace the handset or press the ON/
OFF key.