Panasonic 524X07801B manual Distinctive Ringing, To make a Disa call to an extension

Section 700 - Operation Chapter 3. System Features

Operation

To make a DISA call to an extension:

	Action	Result
1.	From an outside location, enter the DISA trunk number.	DISA dial tone
2.	If an incoming DISA code is assigned enter the DISA code
	(up to 10 digits). Otherwise, proceed to step 3.
3.	Dial the extension number.

To make a DISA call to an outside number:

	Action	Result
1.	From an outside location, enter the DISA trunk number.	DISA dial tone
2.	If an incoming DISA code is assigned enter the DISA code
	(up to 10 digits). Otherwise, proceed to step 3.
3.	Enter the Trunk group number (9 or 81-84)
4.	Dial the phone number.

Hardware Requirements

•N/A

Related Programming

•FF1-0-26: DISA Incoming Code

•FF1-0-26: DISA Outgoing Codes and TRS Assignments

•FF1-0-04: Class of Service (DISA ID Check)

•FF2: Ring Type

Considerations

•Busy override cannot be used for a DISA line.

•DISA can be used to access extensions as well as outside numbers.

•Paging cannot be accessed from a DISA line.

•While dialing an extension number, the * key may be entered to cancel dialing and return to dial tone. The # key may be entered to disconnect.

Distinctive Ringing

Description

Distinctive Ringing sets CO calls to ring with a distinctive ring based on the trunk. This “ring” also identifies the call as an outside call instead of an inside call.

576-13-700 DBS 576 (USA), Revised 6/11/98 41