Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 181
FF8-1: PSD Names
Considerations
PSD number can be dialed from One-Touch keys. (For additional information, see “One-Touch
Keys” on page 173.)
Storing a new number erases any previously stored data.
If the called party’s number and name are st ored i n the PSD code , tha t i nformation a ppears on the
display when you use the speed dial code.
Speed dial numbers can contain up to 24 characters. The following table reflects which keys to
use.
* Indicates that the digits that follow are either a feature access code or an extension
number. (Not needed if your System is set for Intercom Level.) See Note below.
** Indicates that the digits that follow are for an outside number and the System should
seize the next available trunk when dialing. (Not needed if your System is set for CO
Level.) See Note below.
*** Indicates that the enclosed digits should not be displayed during dialing. Must precede
and follow the digits that you do not want displayed. Example: AUTO *2 555-4143
AUTO *2.
Note: The System has two levels - CO Level and Intercom Level. If set at CO Level (default),
you must enter the code for Intercom Level when programming a feature access code or
extension number for speed dialing. If the System is set at Intercom Level, you must enter the
MCO Code when programming an outside number for speed dialing.
System Speed Dial
You can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can be
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
To indicate. . . Enter/Press Shown on Display?
Digit or character 0, 1 - 9, *, #yes (unless preceded by AUTO * 2 - see below)
Intercom Level * AU TO * # no
MCO Code ** AUTO * 0 no
Pause REDIAL no
DP - DTMF Code AUTO * * no
SSD Code AUTO NN(N) no
Hyphen (-) PROG -
Display Number (Start / Stop) *** AUTO * 2