Panasonic 524X07801B manual Conference Calls, Three-Party Conferencing, CNF1CO XXX or EXT XXX

Section 700 - Operation Chapter 5. Key Telephone Features

Conference Calls

CPC-96, CPC-288, and CPC-576 All Versions

Description

Conference Calls allow you to add another party to an existing conversation. With the standard system configuration, up to 3 parties can be included in a conference call at any one time. If the optional Conference Card is installed, up to 8 parties can participate in a conference call.

The System supports the following types of Conference Calls:

•Three-Party Conferenc ing

•Eight-Party Con ferencing

Three-Party Conferencing

The System supports the following types of three-party conference calls:

•3 extensions

•2 extensions and 1 CO line

•1 extension and 2 CO lines

Operation

To establish a 3-party conference call:

	Action	Result
1.	While on a call, press the HOLD key or the line key of your	Extension number, outside line number,
	current call.	or name of held party displays
2.	Press a vacant CO key, enter a trunk access code, or dial the	• Outside dial tone (if trunk access code
	number of the extension you wish to add to the call.	entered)
		• CO #XXX displays (where XXX = line
		number)
3.	If you pressed an unlit line key in step 2, dial the number of	Dialed number displays
	the party you wish to add to the call. Otherwise, proceed to
	step 4.
4.	Press the CONF key when your call is answered.	CNF1:CO XXX or EXT XXX and
		CNF2:CO YYY or EXT YYY displays
		(where XXX = first party and YYY = sec-
		ond party)
5.	To drop out of the conference call, hang up.
6.	To release a conference member, press PROG + 1 to release
	conference member 1 or press PROG + 2 to release confer-
	ence member 2. Note: The conference member numbers are
	shown on the display.

Hardware Requirements

•N/A

576-13-700 DBS 576 (USA), Revised 6/11/98 143