94 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Table 10. Special Day Start Time/Mode - addresses & values 10. Press the HOLD key. 1002 :
S Day 01-1 Mode displays
11. Enter the desired mode for Special Day ( (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
12. Press the HOLD key. Next Special Day mode displays
13. To set additional Special Day modes, press the volume up
or down key or press the HOLD key to mov e to the desi red
mode.
14. Repeat steps 7-13 until all Special Day modes are s et. (Up
to 20 special days may be en tered.)
Note: The entry positions are listed in Table 10.
15. Press the AUTO key to exit the entry mode. 1-
Mode Special Day displays
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/ OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
8107-1 (1000-1219) Hold (MMDD or HHMM or 0-5) Hold
-- VALUES --
(MMDD, HHMM, or 0-5)
-- ADDRESS NOs. (1000-1219) --
MODES
1st MODE 2nd MODE 3rd MODE 4th MODE 5th MODE
Special Day 1 Date
(MMDD) 1000
Start Time
(HHMM) 1001 1003 1005 1007 1009
Mode (0-5):
0=None
1=Day 1
2=Day 2
3=Night
4=Night (1)
5=Night (2)
1002 1004 1006 1008 1010
Action Result