Panasonic 524X07801B - page 142

142 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To use Manual Camp-on:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual Camp-on Send)
• FF1-0-03: Extension COS (Manual Camp-on Receive)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3-0: Auto Camp-on
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See “To camp a call onto a
busy extension:” on page 135.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. Busy tone
3. Enter the Camp-on (Call Waiting) code (default = 2). • Wait XXX displays (where XXX =
extension number/name)
• Called party hears alert tone from the
speaker
• Calling party hears ringback tone
4. Remain on the line until the called party answers.
Action Result
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR....
Press the HOLD key.
• Current call placed on hold
��� Connected to waiting call