Chapter 5. Key Telephone FeaturesSection 700 - Operation

 

Action

Result

 

 

 

4.

Dial the phone number to be stored.

 

 

 

 

5.

Press the HOLD key.

 

 

 

 

6.

Replace the handset or press the ON/OFF key.

 

 

 

 

To assign an System Speed Dial (SSD) numbers to a one-touch key:

 

Action

Result

 

 

 

1.

Lift the handset or press the ON/OFF key.

Intercom dial tone

 

 

 

2.

Press the PROG key.

 

 

 

 

3.

Press the one-touch key to be programmed.

 

 

 

 

4.

Press the AUTO key.

 

 

 

 

5.

Enter the SSD bin number to be programmed.

 

 

 

 

6.

Press the HOLD key.

 

 

 

 

7.

Replace the handset or press the ON/OFF key.

 

 

 

 

To chain 2 to 6 SSD numbers to a single one-touch key:

 

Action

Result

 

 

 

1.

Lift the handset or press the ON/OFF key.

Intercom dial tone

 

 

 

2.

Press the PROG key.

 

 

 

 

3.

Press the one-touch key to be programmed.

 

 

 

 

4.

Press the AUTO key.

 

 

 

 

5.

Enter the SSD bin number that contains the first part of the

 

 

number to be dialed.

 

 

 

 

6.

If a pause is required, press the REDIAL key

• Pause occurs between access code and

 

 

telephone number

 

 

R displays

 

 

 

7.

Repeat steps 4-5 (up to 5 more times) for each additional

 

 

speed dial number to be chained.

 

 

 

 

8.

Press the HOLD key.

 

 

 

 

9.

Replace the handset or press the ON/OFF key.

 

 

 

 

174

DBS 576 (USA), Revised 6/11/98

576-13-700

Page 174
Image 174
Panasonic 524X07801B manual To chain 2 to 6 SSD numbers to a single one-touch key