Chapter 6. DSLT Features

Section 700 - Operation

Flash

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

You can send a flash signal on your telephone to release an outside line and then either automatically reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.

Trunk programming determines whether your phone reseizes the outside line or switches to extension dial tone status.

Hardware Requirements

N/A

Related Programming

FF1-1: Flash Timer

FF2: Flash Pattern

FF2: Flash Key Operation

FF3: Flash on PROG (Recall)

Considerations

N/A

Hot Line

CPC-96, CPC-288, and CPC-576 Version 1.0

Description

Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number simply by lifting the handset. You do not have to dial any digits.

Operation

To immediately connect to a pre-assigned extension or speed dial number:

Action

Result

 

 

1. Lift the handset or press the ON/OFF key.

Automatically connected to pre-assigned

 

extension or speed dial number

 

 

Hardware Requirements

N/A

Related Programming

FF5-5: Hot Line

230

DBS 576 (USA), Revised 6/11/98

576-13-700

Page 230
Image 230
Panasonic 524X07801B manual 230