Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 65
CO line No. (CO line No.: 1 to 576 / When CO line is disconnected while the call is on hold:
*1 to *576)
Dialed No. (24 digits max. including 0-9, *, # Cannot display Flash or Pause. If a number is
hidden, * will appear instead of digits. * will stay with the call even if the call is transferred.
For Format 2, an I Proceeds the digits if it is an incoming call.)
Accounting code (10 digits max.)
Verified Account code (Ve rified Account code table number V001 to V500)
Caller data (Format #2 only)
ISDN charge data (Format #2 only - originator number applies to ISDN only)
H Carriage return line feed
Related Programming
FF2: SMDR for Outbound Calls (for Analog, E&M Tie Line, and ISDN)
FF2: SMDR for Inbound Calls (for Analog, E&M Tie Line, and ISDN)
FF1-006: Serial Port Receive Data
FF1-009: SMDR Output Format
Hardware Requirements
A printer or external call accounting system is required to receive SMDR data.
Considerations
A call must be answered to generate SMDR data (e.g., answered by Voicemail, call pickup, etc.)
You can specify which type of SMDR data format is sent (i.e., either Format 1 or 2).
Toll Restriction Service
Description
Toll Restriction Service (TRS) allows access levels, including the prohibit ion of long distanc e calls or
after-hours calls, to be assigned to specific extensions or CO lines. This minimizes non-business
related calls and reduces phone bills by only allowing long distance calls over designated lines.
TRS can be used in conjunction with Automatic Route Selection (ARS).
TRS classes are set on an extension and trunk basis. Up to 50 TRS classes can be assigned.
Each TRS class is then assigned to a TRS level. This level i s used as the basis for allowing or
restricting calls.
There are 10 TRS levels ava ilable: 0 denies all calls, 1-8 may be partially restrictive per
assignments, and 9 allows all calls.
TRS can restrict the number of digits dialed (1 to 20 digits limit or no limit).
TRS can restrict the use of System Speed Dials (SSDs) for out dialing on a TRS class basis;
either no system speed dials or limit the range of SSDs.
5
6
7
8
9
10