90 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
•N/A
Considerations
•N/A
Set Message Key ID Code
Description

(For a description of the Message Key ID Code Feature, see “Message Key ID Code” on page 70.)

On a large display phone you can use a Message key to either retrieve voice mail messages or re spond

to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you

need to set the Message Key ID code to identify the caller to the voice mail system. You can also use

the Message key to program a voice mail password.

Operation

To set the Message Key ID code:

Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 06.
3. Press the HOLD key. 8106-
MSG Ke
y
ID Code displays
4. Press the HOLD key. MSGID-EXT Numbe displays
5. Dial the extension number of the phone being programmed.
6. Press the HOLD key. MSG-ID EXT XXX displays (where
XXX = extension number)
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FLASH key.
8. Press the HOLD key to store the entry. Next extension number displays
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
Desired extension number displays
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the AUTO key to exit the entry mode. MSGID - EXT Numbe displays
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off