Chapter 5. Key Telephone Features

Section 700 - Operation

DP to DTMF Signal Conversion

CPC-96, CPC-288, and CPC-576 All Versions

Description

Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from DP to DTMF signaling when using a DP trunk. For instance, if you dial into a Voice Mail system using a DP trunk, you can switch to DTMF signaling to communicate with the Voice Mail system.

The System can automatically change DP to DTMF tones based on the incoming and outgoing timers.

Operation

To switch from DP to DTMF dialing:

Action

Result

1. Press the * key or the # key.

Hardware Requirements

N/A

Related Programming

FF1: DTMF

FF2: DP to DTMF (Outgoing)

FF2: DP to DTMF (Incoming)

Considerations

N/A

DSS/72 Console

CPC-96, CPC-288, and CPC-576 All Versions

Description

The DSS/72 console is a 72-key console that can be attached to a key telephone. The 72 keys on the DSS/72 can be programmed as Direct Station Select (DSS) keys for internal lines.

In addition to providing direct station selection, the DSS keys also provide Busy Lamp Fields (BLFs) that allow you to monitor the status of other extensions. The LED lights red when the assigned extension is busy, and lights green when Call Forwarding or Do-Not-Disturb (DND) are activated.

For additional information, see “Flexible Function Keys” on page 152.

Hardware Requirements

VB-44320

Related Programming

150

DBS 576 (USA), Revised 6/11/98

576-13-700

Page 150
Image 150
Panasonic 524X07801B manual DP to Dtmf Signal Conversion, DSS/72 Console, To switch from DP to Dtmf dialing