88 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
6. Press the HOLD key. XXX-
Verified ACCD displays (where XXX =
account code table number)
7. Press the HOLD key. 0001 : AAAAAAAAAAA
XXX:Account Cod displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes m ust be unique. If there is a matchi ng entry
entered, the System will not accept the entry and will double
beep.)
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key. 0002 :X
XXX:TRS Class displays (where X =
TRS Class)
10. Enter the TRS Cla ss to be associated wit h the Verified
Account Code entry.
11. Press the HOLD key to store the entry. 0001 :YYY displays (where YYY = the
next account code table number)
12. To add additional Verified Account numbers, press the vol-
ume up or down key or press the HOLD key to mo ve to the
desired Verified Account table number.
Desired Verified Account table number
displays
13. Repeat steps 8-12 until all Verif ied Account numbers are
entered.
14. Press the AUTO key to exit the entry mode Tabl e Nu mbe r
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/ OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result