Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 271
• FF1-0-03: Extension COS (Broker’s Hold or Conference)
• FF3: Extension COS
Considerations
• Broker’s Hold must be disabled to establish a conference call.
Eight-Party Conferencing
With the optional Conference Card installed, up to 8 parties can be included in a conference call. On e
of the parties can be a CO line (i.e., 8 extensions or 7 extensions and 1 CO line).
Operation
To establish an Eight-party Conference Call from the idle status:
To establish an Eight-party Conference Call from your current call:
Hardware Requirements
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the Eight-Par ty Conference code (d efault = 788).
3. Hookflash.
4. Enter a trunk access code, or dial the number of the exten-
sion you wish to add to the call.
5. If you entered a trunk access code, dial the number of the
party you wish to add to the call. Otherwise, proceed to step
6.
6. Hookflash when your call is answered. Connected to called party
7. To add additional parties to the call, hookflash and repea t
steps 3-6.
Action Result
1. While on a call, hookflash to place the current call on hold. Current call on hold
2. Enter the Eight-Par ty Conference code (d efault = 788).
3. Hookflash.
4. Enter a trunk access code, or dial the number of the exten-
sion you wish to add to the call.
5. If you entered a trunk access code, dial the number of the
party you wish to add to the call. Otherwise, proceed to step
6.
6. Hookflash when your call is answered. Connected to called party
7. To add additional parties to the call, hookflash and repea t
steps 3-6.