Panasonic 524X07801B manual Call Park, To park a call on this extension

Chapter 7. SLT Features Section 700 - Operation

Related Programming

•F1-0-03: Extension COS (Hookflash Control on SLTs - Broker’s Hold or Conference)

•FF3: Extension COS

Considerations

•If Broker’s Hold is enabled, it is not possible to establish a conference call from an SLT position.

Call Park

You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient of the call.

CO, Extension, and Network calls may be parked.

There are two ways for an extension to park a call on the DBS 576. One way is to park the call at the receiving extension and to retrieve the parked call at another extension by dialing the park answer code plus the parking extension number. The other way is to park the call at another extension and dial the park transfer answer code at the other extension to retrieve the call.

Operation

To park a call on this extension:

	Action	Result
1.	While on a call, press the hookswitch..	• Intercom dial tone
2.	Enter the Call Park Hold access code (default 771)
3.	If necessary, page the party that needs to retrieve the call.

To retrieve a call parked at the originating extension from another extension:

	Action	Result
1.	Lift the handset	Intercom dial tone
2.	Enter the Call Park Answer/Other Ext. access code (default
	773).
3.	Dial the number of the extension that parked the call.	• Connected to parked call

To park a call at another extension:

	Action	Result
1.	While on a call, press the hookswitch.	• Intercom dial tone
2.	Enter the Call Park Transfer access code (default 774)
3.	Dial the extension number to receive the parked call.
4.	If necessary, page the party that needs to retrieve the call.

262 DBS 576 (USA), Revised 6/11/98 576-13-700