82 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Set System Speed Dial Numbers
Description

For a description of System Speed Dial (SSD), see “System Speed Dial” on page 181 for a Digital

Key Telephone, “System Speed Dial” on page 240 for a Digital Single Line Telephone (DSLT), and

“System Speed Dial” on page 283 for a Single Line Telephone (SLT).

Operation

To set SSD numbers:

Hardware Requirements
•N/A
Related Programming
•N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 02.
3. Press the HOLD key. 8102-
SSD Assi
g
nment displays
4. Press the HOLD key. 0 :
SSD Number displays
5. Press the HOLD key. Enter SSD # displays
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key. -SSDXXX XXX displays (where
XXX = SSD bin number)
8. Enter the SSD digits to be dialed.
Note: Press the FLASH key to clear an entry or any exist-
ing data.
9. Press the HOLD key to store the entry. Next SSD bin number displays
10. To set additional SSD numbers, press the volum e up or
down key or press the HOLD key to move to the desired
SSD.
Desired SSD bin number displays
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off