Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 205
To enter an account code during an outside call:
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) can be
allowed to make outgoing calls by entering a Verified Account code that changes the TRS.
After a call is made, the SMDR record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:
Hardware Requirements
• An SMDR printer or external call accounting system is required to collect account code records.
Related Programming
• FF1-0-19: TRS Class for Forced Account Code
• FF1-2: Dial Plan
• FF3: Forced Account
• FF3: Verified Account
• FF8-1-04: Verified Account Codes with TRS Class
Considerations
• Account codes are not available during conversation recording mode for the Built-I n Voice Mail.
• Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 dig its
only.
• Account codes will be cancelled after using CO queuing.
Action Result
1. During a call, press the AUTO key.
2. Press the # key.
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (10 digits).
4. Press a vacant CO key or enter a trunk access code.
5. Dial the phone number.