Panasonic 524X07801B manual To place a call on Broker’s Hold

Section 700 - Operation Chapter 5. Key Telephone Features

Related Programming

•FF1-0-01: Exclusive Hold (CO Key)

•FF1-0-03: Extension COS (Hold Key Operation - System vs. Exclusive)

Considerations

•Intercom calls will be held as Exc lusive when placed on hold by pressing the HOLD key.

Broker’s Hold

Broker’s Hold allows you to toggle between the current call and the last held call by pressing the HOLD key.

Operation

To place a call on Broker’s Hold:

	Action	Result
1.	Pick up the first call.
2.	Press the HOLD key.	First call on hold
3.	Pick up the second call.
4.	Press the HOLD key.	Second call on hold, first call retrieved

Hardware Requirements

•N/A

Related Programming

•FF3: Broker’s Hold

Considerations

•In order to use Broker’s Hold with CO calls, the first call must have a possible appe arance and non-appearance, but in the case of appearance, the first call must be one of CO key.

Call Park

You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient of the call.

CO, Extension, and Network calls may be parked.

There are two ways for an extension to park a call on the DBS 576. One way is to park the call at the receiving extension and to retrieve the parked call at another extension by dialing the park answer code plus the parking extension number. The other way is to park the call at another extension and dial the park transfer answer code at the other extension to retrieve the call.

576-13-700 DBS 576 (USA), Revised 6/11/98 127