Section 700 - Operation

Chapter 5. Key Telephone Features

To automatically redial the last number dialed:

 

Action

Result

 

 

 

1.

Lift the handset or press the ON/OFF key.

• Outside dial tone

 

OR...

CO XXX displays (where XXX = trunk

 

Press a vacant CO key or enter a trunk access code.

number)

 

 

 

 

 

2.

Press the REDIAL key.

Last number dialed displays

 

 

 

3.

Complete the call and replace the handset or press the ON/

Line key LED turns red, then goes off.

 

OFF key.

 

 

 

 

Hardware Requirements

N/A

Related Programming

FF1-0-03: Extension COS (Intercom Redialing)

FF3: Extension COS

Considerations

Extension Class of Service (COS) determines whether Last Number Redial can be used for both intercom and CO calls or CO calls only.

Line Appearances

CPC-96, CPC-288, and CPC-576 All Versions

Description

The System provides three types of line appearances

• Direct Station Select (DSS) / Busy Lamp Field (BLF) Appe arances

Direct Line (DL) Appearances

MCO Line Appearance

DSS/BLF Appearances

When a DSS/BLF key is programmed, it automatically provides one-touch dialing and DSS and BLF for the assigned extension numbers. If desired, the DSS/BLF key can also provide ring or delayed ring monitor. For example, you can set extension A as a DSS/BLF ringing key on extension B. When extension A rings, the LED of the DSS/BLF key on extension B flashes and the phone rings.

Ringing or delayed ringing can be set on extensions which have a BLF key. The LED of the DSS/BLF key flashes green during ringing and the display shows the BLF extension number.

When extension A is in use, the LED of the DSS/BLF key on extension B lights red. If one extension has the Call Forwarding or Do-Not-Disturb (DND) feature activated, the DSS/BLF key lights green.

576-13-700

DBS 576 (USA), Revised 6/11/98

163

Page 163
Image 163
Panasonic 524X07801B manual Line Appearances, DSS/BLF Appearances, To automatically redial the last number dialed