Panasonic 524X07801B Non-Verified Account Codes, To enter an account code before making a call

Section 700 - Operation Chapter 5. Key Telephone Features

This feature works with Station Message Detail Recording (SMDR). During a phone call, a station user can silently enter an accounting or client billing code. The entered Code will display on the phone’s LCD as it’s dialed, so the user can tell it’s being registered. Then later, the SMDR reports will show the Code dialed for each call, and even sort the report by these Codes.

There are two different types of account codes you can use in the DBS 576:

Non-Verified Account Codes

Non-Verified Codes aren’t checked by the system for validity; the user can enter anything from 1-10 digits long. Individual phones can be programmed to accept forced Account Codes (the user must enter a code for every call) or voluntary Account Codes (the user can enter a code, but doesn’t have to, for each call).

Non-Verified Account Codes can be assigned to incoming and/or outgoing calls. For incoming calls, the user can enter the Code anytime during the call. For outgoing calls, the user either enters the Code before accessing an outside line (for forced Codes), or anytime during the call (for voluntary Codes).

Verified Account Codes

Verified Account Codes entered by phone users must match a code that has been preprogrammed into an Account Code Table. These codes can also be either forced or voluntary. You can program these codes with their own Toll Restriction Service (TRS) Class assignment so that, when entered, they will override the extension’s TRS Class. Thus, Verified Account Code users can “float” from phone to phone, placing calls that would normally be restricted on that phone.

Non-Verified Account Codes

Non-verified Account codes are voluntary codes. (i.e., You do not have to enter an account code before making a call.)

You can assign Non-verified Account codes to both incoming and outgoing calls. To assign an account code to an outgoing call, you enter the account code before making the call or during the call. To assign an account code to an incoming call, you enter the account code during the call.

Operation

To enter an account code before making a call:

	Action	Result
1.	Lift the handset or press the ON/OFF key.	Intercom dial tone
2.	Enter the Account Code feature code (default = 8#).	Enter Account # displays
3.	Enter the Account Code (up to 10 digits).	Specified account code displays
4.	Press the # key.	Entered Account # displays
5.	Press a vacant CO key or enter a trunk access code.	CO Key LED lights
6.	Dial the phone number.	Dialed phone number displays

576-13-700 DBS 576 (USA), Revised 6/11/98 113