Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 215
Operation
To place a call on System Hold:
To retrieve a call placed on System Hold:
To retrieve a held call on a specific trunk:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold by HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF3: Extension COS
Considerations
•N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialing the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialing the orbit number.
Operation
To place a call on Floating Hold:
Action Result
1. While on a call, press the HOLD key. Intercom dial tone
Action Result
1. Press the HOLD key. Intercom dial tone
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.
Action Result
1. Press the HOLD key. Intercom dial tone