Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 269
automatically connected to the new call. The called party can also place the first call on hold by
Hookflashing and then answering the waiting call.
The System provides two types of call waiting:
•Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal.
You need only to remain on the line.
•Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy
extension.
Operation
To use Automatic Camp-on:
To use Manual Camp-on:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF1-0-03: Extension COS
Action Result
1. Lift the handset. Intercom dial tone
2. Dial the extension number. • Called party hears alert tone
• Calling party hears ringback tone
3. Remain on the line until the called party answers.
Action Result
1. Lift the handset. Intercom dial tone
2. Dial the extension number. Busy tone
3. Enter the Camp-On (Call Waiting) code (default = 2). • Called party hears alert tone
• Calling party hears ringback tone
4. Remain on the line until the called party answers.
Action Result
1. Replace the handset.
2. Lift the handset again to be connected to the waiting call.
OR....
Hookflash.
• Current call placed on hold
• Connected to waiting call