168 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To leave a message waiting indication:
To answer a message waiting indication (callback):
To cancel a callback message:
Note: Message waiting/callback messages may also be cancelled by either the originator or the
receiver by calling the other party.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number.
3. While the phone is still ringing, or when you hear the busy
tone, enter the Mes sage Wait Set code (defau lt = 4). MSG Accepted displays
4. Replace the handset or press the ON/OFF key. • Message lamp flashes at called exte n-
sion
• MSG EXT XXX displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Messa ge Wait Callback code ( default = *6) or
press the MSG key if using a large-display phone. • Telephone automatically dials exten-
sion that sent the me ssage waiting indi -
cation
• Message lamp goes off when your call
is answered
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Enter the Callback Request Cancel code (default = *5) or
press the MSG key if using a large-display phone. MSG Cleared displays
3. Replace the handset or press the ON/OFF key. Message lamp goes off