Section 700 - Operation Chapter 3. System Features
576-13-700 DBS 576 (USA), Revised 6/11/98 61
DID Day/Night Ringing
Incoming DID calls can be set to ring at day destinations when the system is in day mode and ring at
night destinations when the system is in night mode.
Hardware Requirements
•N/A
Related Programming
• FF1-4: DID Day Destination
• FF1-4: DID Night Destination
Considerations
•N/A
DID Day/Night Busy/Delayed Ringing
DID Day/Night Busy/Delayed Ringing causes an incoming DID call to a busy primary extension to
ring at a designated extension or extensions. DID Busy/Delayed Ringing also causes an incoming
DID call that is unanswered at a primary extension within a certain period of time, to ring at a
designated extension or extensions. Separate ring destinations are available for day and night modes.
DID Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DID Busy/Delayed
Ringing destination.
Hardware Requirements
•N/A
Related Programming
• FF1-4: DID Day Busy/Delayed Destination
• FF1-4: DID Night Busy/Delayed Destination
• FF5-0-02: Queuing Timer
Considerations
• Call Forwarding takes priority over DID Busy/Delayed Ringing
• If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DID
Busy/Delay Ringing destination. (See “DID Day/Night Busy/Delayed Ringing” on page 61.)
Busy Lamp Field Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those
keys.
Hardware Requirements
•N/A
Related Programming
• FF4: FF Key Assignment