Panasonic 524X07801B manual PSD Name displays, C D E F PXX displays where

Chapter 4. User Maintenance Section 700 - Operation

Operation

To set PSD names using either a large-display or small-display phone:

	Action		Result
1.	If not already in User Maintenance mode, enter User Main-	81-
	tenance mode. (See “To enter User Maintenance mode:” on	User MAINT displays
	page 75.)
2.	At the 81 level, enter 01.
3.	Press the HOLD key.	8101-
		PSD Assignment displays
4.	Enter 1.
5.	Press the HOLD key.	1	:
		PSD Name displays
6.	Press the HOLD key.	EXT Number displays
7.	Dial the extension number.
8.	Press the HOLD key.	Enter PSD # XXX displays (where
		XXX = dialed extension number)
9.	Enter the PSD bin number (80-99).
10.	Press the HOLD key.	A B C D E F PXX displays (where
		PXX = PSD number)
11. Enter the PSD name:
	• If using a large-display phone, press the soft key next
	to the desired row of letters. (See Example 1 on page
	79.)
	• If using a small-display phone press the appropriate
	one-touch key. (See Example 2 on page 80.)
	Note: Press the FLASH key to clear any existing data.
12. Use the bottom row of FF keys to select a single letter.
	• See Example 1. Large-display phone on page 79.
	• See Example 2. Small-display phone on page 80.
	Notes:
	• Press the * key to erase a single entry.
	• Press the # key to enter a space.
13. Repeat steps 11-12 as many times as necessary to enter the
	desired speed dial name.
	Note: Press the FLASH key to clear the entire entry.
14.	Press the HOLD key to store the entry.	Next PSD bin number displays
15.	To set additional PSD names, press the volume up and	Desired PSD bin number displays
	down key or press the HOLD key to move to the desired
	PSD.
16. Repeat steps 11-15 until all PSD names are entered.

78 DBS 576 (USA), Revised 6/11/98 576-13-700