Panasonic 524X07801B - page 85

Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 85
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
5. Press the HOLD key. 2 :
SSD Index displays
6. Press the HOLD key. Enter Index # displays
7. Enter the SSD Index number (1 - 2).
8. Press the HOLD key. A B C D E F XXX displays (where
XXX = SSD bin number)
9. Enter the SSD Index name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
79.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 80.)
Note: Press the FLASH key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 79.
• See Example 2. Small-display phone on page 80.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as neces sa ry to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry. Next SSD index number displays
13. To set additional SSD index names, press the v olume up or
down key or press the HOLD key to move to the desired
SSD.
Desired SSD index number displays
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the AUTO key to exit the entry mode. Enter SSD # display s
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OF F
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result