Panasonic 524X07801B - page 225

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 225
Operation
To set Automatic Camp-on:
To set Manual Camp-on:
To answer a Camp-on (Call Waiting) signal:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Manual Camp-on Send)
• FF1-0-03: Extension COS (Manual Camp-on Receive)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3-0: Auto Camp-on
Considerations
• You can transfer an outside call to a busy extension using Camp-on. See “Camping a Call Onto a
Busy Extension” on page 223.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. • Called party hears alert tone
• Calling party hears ringback tone
3. Remain on the line until the called party answers.
Action Result
1. Lift the handset or press the ON/OFF key. Intercom dial tone
2. Dial the extension number. Busy tone
3. Enter the Camp-on (Call Waiting) code (default = 2). • Called party hears alert tone
• Calling party hears ringback tone
4. Remain on the line until the called party answers.
Action Result
1. Replace the handset or press the ON/OFF key.
2. Lift the handset or press the ON/OFF key again to be con-
nected to the waiting call.
OR....
Press the HOLD key.
• Current call placed on hold
• Connected to waiting call