2INSTALLATION
1.INSTALLATION
1.1 Location
Now, you have to choose a suitable location for the machine. For the best possible performance, install your machine in a place which satisfies the following conditions.
●Not exposed to direct sunlight
●Well ventilated (air turnover at least three times per hour)
●Level
●Not subject to vibration
●Away from other electronic equipment, to avoid interference.
●Away from areas containing corrosive gas
●
●
●Temperature 63 to 82°F
●Humidity 40 to 70% RH (do not install near a humidifier)
●Away from heaters and air conditioners, to avoid sudden changes of temperature
●Within 5 yards of a
●With the following clearance -
6“ |
|
|
| rlliik |
|
|
|
| |
| Ml | |||
* | ||||
I | — |
| — | — 1 |
I |
| [ |
| |
| ||||
1 |
| ,R!aJ | ||
1 | _ |
| I | |
| u.— |
| ||
Front
v
Important Points about Power Connection
●The supply from the wall outlet must not fluctuate by more than 20V either side of 11 5V ac.
. The power cord should not be laid in a place where it might trip somebody.
●Do not lay anything on the power cord.
. If you have to use an extension cord, make sure that it is capable of carrying 125V/1 5A, and that your facsimile terminal is the only piece of equipment connected to that cord.
. The facsimile terminal must be grounded with a
12
