Ricoh FAX4000L manual Cater wil Iight, Select the contrast and resolu- tion, Press hJo twice

1.Make sure the unit is in standby mode.

2.Press T ansfer Request The indi -

cater wil Iight.

If PROGRAM OWN TEL # appears, do Function 80 now. See page 24.

3. Place the document in the feeder.

Select the contrast and resolu- tion.

READY 100C, 02 30PM

PAGES 00 KEYPAD N

4. Press hJo twice.

~

~

(SAF means Store And Forward)

5.Enter the number of the broad- caster.

Use a Quick Dial key, Speed Dial Code, or full number at the built- in keypad.

Example: Quick 01

	SAN	FRANCISCO
QUICK#	01	YN

6.Press Yes (or press NO if you made a mistake).

READY 100CO 02 30PM

# * QUICK SPEED KPAD

7.Enter an end receiver number.

Note: If the broadcaster is a FAX4000L, FAX95 or FAX105 (FAX105 must have optional memory installed), you must use the dialing method given in Note 2 on the next page.

Use a Quick Dial key, Speed Dial Code, Group, or full number at the built-in keypad. See Note 1.

I 1

Quick Dial, page 40.

Speed Dial, page 40.

Groups, page 41.

See Note 2 for an extra dialing method, using Quick Dial, Speed Dial, and Groups stored in the broadcaster.

8.Press Yes (or press hlo if you made a mistake).

READY ‘OOO. 02 30PM

# * QIS’KPAD’ START

9. Either:

Enter another end receiver number.

Go to step 7. Do not enter more than 30 end receivers.

Or:

Press Start

55