6LOOKING AFTER THE MACHINE

5. REPLACING THE CLEANING UNIT

When the Cleaning Unit indicator starts blinking, the cleaning unit is almost full of used toner. You can
make 100 more copies before the indicator will remain lit and the cleaning unit must be replaced.
1.
2.
Open the upper unit by pushing the upper
unit release button.
Note :Wear the provided gloves.
I
While holding down the green master unit
release lever, slide out the master unit (lift
the green ledge as shown in the diagram).
Caution: Do not touch the belt surface.
3. To protect the master surface, put the mas-
ter unit on a flat table and put asheet of
paper on the master unit.
,
Master unit Release I
II\J
.> /’
.Table
‘1’

102