Ricoh FAX4000L manual Dial the destination address, then press Yes Press Start

1-13 Sending Abnormally Thick or Large Sheets

Using the manual feed feature, you can ex- tend the maximum document width to A2 [23.4”] width, and the maximum document thickness to 0.4 mm [16 roils]. Manual feed should also be used for thinner pages than normal.

If you wish tosendan original that is thicker

than the recommended maximum thick- ness, you can send it as follows.

4 ADVANCED FEATURES

A2 .S~ze

pjyiynmj

You can also transmit an original that is wider than the document guide; fold it in half and use the manual feed lever, as follows:

Be sure to use Memory transmission (the Memory indicator must be lit).

1. Push the manual feed button while placing the document in the feeder.

Notes: 1. Push the document in until docu- ment feed starts.

2.Place only one sheet in the feeder.

2.Dial the destination address, then press Yes

3.Press Start

If you have more than one original, place it in the feeder immediately after the trailing edge of the previous sheet has been fed in.

1.Fold the original in half.

2.Push the manual feed button while placing the folded document in the feeder.

Note: Push the document in until document

feed starts.

3. Dial, press Yes , and press

Start

4.After the original has been fed through, place it in the feeder again, the other side facing down.

Note that two calls are needed to send a very wide original. To use just one call, use Batch Transmission (see page 62 for more on Batch Transmission).

1.Store the second half of the message using Memory Transmission and Send Later (use Speed Dial or Quick Dial or this procedure will not work).

2.Store the first half of the message using Memory Transmission, but not using Send Later. The machine will send the first half, then the second half, without disconnecting the line.

61