Ricoh FAX4000L manual Press Yes to store the label, To erase Program, press, No . Go to step

6.Press Yes to store the label,

~

– Using a Program –

a) Transmission Program

4 ADVANCED FEATURES

7.You can now program a number

into this key for telephoning only.

See “Programming Quick Dial and Speed Dial” for more infor- mation.

Or press Function to return to

standby mode.

1)Place the documents into the feeder.

2)Select the required contrast and resolution.

3)Enter the page count and your department code, if required.

4)Press the key into which the desired program has been stored.

b)Polling Reception Program

1)Press the key into which the desired program has been stored.

When you press a key, the label that you gave the program is now displayed. Check the label to make sure that you have the right program.

Note: If TOO MANY STATIONS is displayed, either delete a polling or memory file (Function 66 or 67) or try the program again later.

— Erasing a Program –

1. PreSS	Function		6		0	Yes	.	3. To erase	the program, press
								Clear .
	~
2. Press	the key		that	contains			the
program you want to erase.								4. To erase another program, press
Example:	Press	01 .
								No . Go to step 2.
	FAX	#	01	IS		Y/Nlc		If you have finished, press
	USED	AS	PROGRAM			KEY
								Function	.

If you pressed the wrong key, press No.