8REFERENCE MATERIAL
Pollinq File:
This is aset of instructions (destinations to be polled, time of polling) for polling reception.
Pulse Dialing:
This method of dialng uses astring of pulses to represent each dialed digit.
Reception:
The act of receiving adocument.
Reduction:
If your document iswiderthan thepaper available inthe other terminal, your terminal will automatically
reduce it so that it will fit.
Remote Terminal:
The facsimile terminal that you are sending to or receiving from.
RTI:
Remote Terminal Identification. See page 20.
SAF:
Store and forward.
SAF File:
Same as “Memory File”; see the previous page.
SAF Memory:
This is the memory used for storing documents.
Sendina:
Same as “Transmission”, see below.
Standby Mode:
The terminal is said to be in standby mode when it is idle.
Terminal:
Afacsimile terminal, such as your machine.
Time Designation:
This is programming an operation to take place
Tone Dialing:
This method of dialing uses atone to represenl
Transmission:
at alater time (e.g., Send Later, Poll Later).
each dialed digit.
The act of sending adocument.
TTI:
Transmit Terminal Identification. See page 20.
125