Roland Vs-880 Overall settings and status checking, Adjustment procedure

Chapter 10 Overall settings and status checking

If the display area is difficult to read (Contrast)

Depending on the location where the VS-880 is placed, the display may sometimes be difficult to read. In such cases, use the following procedure to adjust the display contrast (0Ð15).

Adjustment procedure 1

1.Press [SYSTEM]. If a message with a question mark such as “SYS System PRM?” does not appear, press [SYSTEM] once again.

2.Use PARAMETER [ ][ ] to get the “SYS System PRM?” display, and press [YES].

3.Use PARAMETER [ ][ ] to get the “SYS LCD Contrast=” display and then use the TIME/VALUE dial to adjust the contrast.

4.When you finish making the setting, press [PLAY (DIS- PLAY)] to return to Play condition.

●Post Level

The volume of each channel after passing through the channel faders will be displayed. The AUX and MASTER fields indicate the respective volume levels of the signal after passing through the AUX knob and the master fader.

CONDITION MARKER# TIME

dB

0

4

12

24

48

INPUT TRACK AUX MASTER

●Play List

The way in which sound is recorded in the various tracks before and after the current time will be displayed.

CONDITION MARKER# TIME

Adjustment procedure 2

1.Press [PLAY (DISPLAY)] once. Then hold down [PLAY (DISPLAY)] and rotate the TIME/VALUE dial to adjust the contrast. The display will show the current setting.

2.When you finish making the setting, release [PLAY (DISPLAY)].

Switching the contents of the display (Bar Display)

In Play condition, you can hold down [SHIFT] and press [DISPLAY (PLAY)] to switch the contents of the bar display. In Edit condition, the contents of the display will change depending on the selected parameter or operation.

●Pre Level

The volume of each channel before passing through the channel faders will be displayed. The AUX and MASTER fields indicate the respective volume levels of the signal after passing through the AUX knob and the master fader.

CONDITION MARKER# TIME

dB

0

4

12

24

48

INPUT TRACK AUX MASTER

dB

0

4

12

24

48

INPUT TRACK AUX MASTER

●Fader/Pan

The settings of the master fader and the PAN knob and fader of each channel will be displayed. If the displayed location of the PAN knobs or faders is different than the actual location (as when the mixer mode has been switched), the current location of the PAN knob or fader will blink.

CONDITION MARKER# TIME

dB

0

4

12

24

48

INPUT TRACK AUX MASTER

114