Chapter 3 Basic operation (as a replacement for a tape MTR)
■Selecting a song (Song Select)
This selects a different song that was saved on the current drive (the currently selected disk drive).
If you wish to select a song that was saved on another disk drive, first switch the current drive (p.93).
1.Press [SONG], select “SNG Song Select?,” and press [YES].
2.The names of the songs saved on the current drive will be displayed. Select a song and execute.
An asterisk Ò✱Ó will be displayed at the beginning of the currently selected song. The sample rate of the song will be displayed in the SYNC MODE field, and the recording mode of the song will be displayed in the SCENE field.
■Turning the power off
(Shut Down)
The recorded performance will be lost if you simply turn the power off. In order to turn the power off safely, you must first make sure that the performance has been saved to hard disk, and that the hard disk heads are parked. This procedure is referred to as Shutdown. Before turning off the power, perform the following shutdown procedure.
*If you turn off the power without performing the shut- down operation, the data may not be saved correctly, or the hard disk may be damaged.
1.While holding down [SHIFT], press [SHUT/EJECT (STOP)].
The upper line of the display will indicate ÒSHUT/EJECT?.Ó
2.Press [YES]. (To cancel, press [NO].)
The display indicate ÒSTORE Current?.Ó
3.If you wish to save the current song, press [YES]. If you do not wish to save it, press [NO]. If you have selected the demo song, press [NO].
When shut down is complete, the display will indicate ÒPowerOFF/RESTART.Ó
4.Turn off the
*The disk platter inside a hard disk will continue to rotate for a time by its momentum after the power is turned off. If a physical shock is applied to the unit during this time, the hard disk may be damaged. Avoid moving the unit for about 30 seconds after turning the power off.
If the display asks “STORE Current?”
When you execute an operation such as creating a new song, selecting a different song, or song copy on the
If you wish to store the currently selected song and then execute the operation, press [YES]. If you wish to execute the operation without saving the current song, press [NO].
If the Song Protect setting of the song is ON, pressing [YES] will cause a message of ÒSong ProtectedÓ to be displayed briefly. Then, without executing the operation, the
If you wish to execute the operation without saving the cur- rently selected song, repeat the procedure once again, and press [NO] in reply to the ÒSTORE Current?Ó message. If you wish to save the currently selected song and then exe- cute the operation, turn Song Protect OFF (p.74).
Re-starting the VS-880
To restart the
1.Execute the
2.The display will indicate “PowerOFF/RESTART,” so hold down [SHIFT] and press [RESTART (PLAY)].
Chapter 3
75