Chapter 1 Trying out the expanded functions
Attack
Adjust the time from when the direct sound level exceeds the threshold level until when the gate is completely open.
Release
Adjust the time from when the hold time has elapsed until the sound is completely muted.
HoldTime
Adjust the time from when the input falls below the thresh- old level until when the release begins.
EQ (Equalizer)
EQ | Off, On |
LowType | Shlv, Peak |
Low.G | |
Low.F | 20Ð2000 Hz |
Low.Q | 0.3Ð10 |
Mid.G | |
Mid.F | 200Ð8000 Hz |
Mid.Q | 0.3Ð10 |
HiType | Shlv, Peak |
Hi.G | |
Hi.F | 1.4Ð20.0 kHz |
Hi.Q | 0.3Ð10 |
OutLevel | 0Ð100 |
EQ (Equalizer)
Turn the equalizer on/off. If this is turned off, the following items will not be displayed.
LowType
Select the type of the low range equalizer.
Shlv: | Shelving type |
Peak: | Peaking type |
Low.G (Low gain)
Specify the gain (amount of boost/cut) for the low range equalizer.
Low.F (Low frequency)
Specify the center frequency of the low range equalizer.
Low.Q (Low Q)
Specify the width of the band around the center frequency specified for the low range equalizer in which the gain adjustment will occur. As this setting is raised, the width of the band affected will become narrower.
Mid.G (Middle gain)
Specify the gain (amount of boost/cut) for the
Mid.F (Middle frequency)
Specify the center frequency of the
Mid.Q (Middle Q)
Specify the width of the band around the center frequency specified for the middle range equalizer in which the gain adjustment will occur. As this setting is raised, the width of the band affected will become narrower.
HiType (High type)
Select the type of high range equalizer.
Shlv: | Shelving type |
Peak: | Peaking type |
Hi.G (High gain)
Specify the gain (amount of boost/cut) for the high range equalizer.
Hi.F (High frequency)
Specify the center frequency of the high range equalizer.
Hi.Q (High Q)
Specify the width of the band around the center frequency specified for the high range equalizer in which the gain adjustment will occur. As this setting is raised, the width of the band affected will become narrower.
OutLevel (Output level)
Adjust the volume level after the sound has passed through the equalizer.
●Space Chorus
This is a chorus which simulates the Roland
Input L |
| Output L | ||
|
| Space Chorus |
|
|
Input R |
| Output R | ||
| ||||
SCH (Space Chorus)
SpaceCho | Off, On |
InMod | Mono, Stereo |
Mode | 1, 2, 3, 4, 1+4, 2+4, 3+4 |
MixBal | 0Ð100 |
SpaceCho (Space Chorus)
Turn space chorus on/off. If this is turned off, the following items will not be displayed.
InMod (Input mode)
Specify whether the input signal is stereo or mono.
Mode (Space mode)
Select the way in the chorus will change.
MixBal (Mix balance)
Adjust the balance between the chorus volume and the direct sound volume.
24
