Chapter 2 Before you start (VS-880 terminology)

This chapter explains basic concepts, internal structure, and basic operation that you will need to know in order to operate the VS-880. Please read this chapter to gain a better understanding of the VS-880.

Sources, tracks, and channels

On the VS-880, the recorder section and mixer section use the terms Òsources,Ó Òtracks,Ó and Òchannels.Ó These terms may appear similar to each other, and will be confusing unless their dif- ferences are clarified.

Source: A signal which is input to the mixer section or recorded in the recorder section. On the VS-880, this term refers in particular to the signals of the analog input jacks and the digital in connector.

Track: A signal that is being recorded or is already recorded on the hard disk. On the VS- 880, this term is used in particular in reference to the signals of the recorder section.

Channel: A signal that is being input or output. On the VS-880, this term is used in particular in reference to the signals of the mixer section.

Doing everything in the digital domain (Digital Studio Workstation)

The VS-880 is a multi-track digital disk recorder that combines a digital disk recorder and a digital mixer in a single unit. The VS-880 provides the same basic functionality expected of conventional analog tape recorders, such as Òsimultaneous recording of multiple tracksÓ and Òsynchronization with MIDI devices.Ó In addition, it has features that are possible only with digital recording, such as Òdata transfer that minimizes deterioration of sound qualityÓ and Òundo-able editing,Ó provid- ing a high level of convenience in music production and video editing.

If an optional VS8F-1 effect expansion board is installed, you will be able to use two high-quality stereo effects.

In addition to the full set of effects such as reverb and chorus that are already provided, the effects now include limiter, enhancer, and a guitar amp simulator that utilizes the COSM technology made famous by the Roland V-Guitar System VG-8. This means that the entire range of studio procedures from recording to overdubbing and mixdown can now be performed with just the VS-880 alone.

Signal flow (busses)

On the VS-880, signals flow through busses. Busses are Òshared lines through which multiple sig- nals can be routed efficiently to multiple tracks/channels.Ó It may be easier to understand this if we use the analogy of water pipe.

INPUT to house from water line

 

Your House

Bathtub

Kitchen Sink

 

INPUTS

OUTPUT

INPUTS

OUTPUT INPUT

OUTPUT

 

OUTPUT

 

INPUTS

Water Heater

Bath Sink

 

 

Cold Water (Buss)

 

Hot Water (Buss)

Toilet

INPUT

OUTPUT

OUTPUT

 

 

to street

OUTPUT

Drain (Buss)

46

Page 46
Image 46
Roland Vs-880 Before you start VS-880 terminology, Sources, tracks, and channels, Signal flow busses