Roland Vs-880 Editing a recorded performance track editing, Use with MIDI devices, Appendices

Introduction

■Chapter 4 Editing a recorded performance (track

editing)

This chapter explains the procedure for Òediting sound,Ó something which was not possible on conventional tape MTR units.

■Chapter 5 Use with MIDI devices

This chapter explains the procedures for using the VS-880 in conjunction with MIDI devices. Read this chapter when you wish to use the VS-880 in synchronization with other MIDI devices.

■Chapter 6 Use with a Zip drive

This chapter explains the procedures for using the VS-880 with a Zip drive. Read this chapter when you wish to use a Zip drive to record a performance. This chapter also explains how to use the VS- 880 with a hard disk or magneto-optical disk.

■Chapter 7 Use with a DAT recorder

This chapter explains the procedures for using the VS-880 in conjunction with a DAT recorder. Read this chapter when you wish to save your performance on a DAT recorder.

■Chapter 8 Using the internal effects

This chapter explains the operating procedures when a VS8F-1 effect expansion board is installed. Read the VS8S-1 ownerÕs manual in conjunction with this chapter.

■Chapter 9 Other convenient functions

This chapter explains operation of functions which were not discussed in earlier chapters, such as sounding the metronome during recording, or when a foot switch is connected.

■Chapter 10 Overall settings and status checking

This chapter explains how to make the settings which affect the overall operation of the VS-880.

■Chapter 11 Taking advantage of the VS-880 (ideas

and examples)

This chapter combines some of the functions discussed in earlier chapters, and gives some actual examples of how you can take advantage of the VS-880.

■Appendices

This chapter contains material which will help you make the best use of the VS-880, such as ÒTroubleshootingÓ and ÒError message list.Ó

5