If you have problems saving the data

Procedure for loading from multiple disks (Extract)

Chapter 6 Use with a Zip drive

7.Insert a Zip disk into the Zip drive, and press [YES].

The display will ask ÒSNG Stow In SC5:U?Ó If it is OK to copy the data, press [YES] twice. To cancel the opera- tion, press [NO].

8.The display will ask, “Store Current?” If you wish to store the current song, press [YES]. If you decide not to store, press [NO].

9.The display will ask, “You’ll Lose Data/Continue ?” If you press [YES] the Song Copy operation will be exe- cuted. If you decide to cancel the Song Copy operation, press [NO].

*All data stored on the Zip disk will be lost. Do not use a Zip disk that contains song data you wish to keep.

10.If the amount of song data is more than can be copied onto one Zip disk, the disk will be ejected, and the dis- play will request “PleaseInsertDisk.” Insert the next disk, and press [YES].

You will return to step 9.

At this time, write the disk numbers on the disk labels so that you will remember the sequence in which they were inserted.

11.If the copy operation involved two or more disks, the display will say “Insert Disk #” (# indicating the disk insertion sequence) at the end. Insert each disk in the correct order, and press [YES].

When copying has been completed successfully, you will return to Play condition.

Procedure for loading from multiple disks (Extract)

When you wish to use archive-song data that was saved to a removable disk drive, use the following procedure to load the song data into the current drive.

1.Press [SONG], use PARAMETER [ ][ ] to get the “SNG Song Copy?” display, and press [YES].

2.The display will indicate “SNG CpyMode=.” Use the TIME/VALUE dial to select “Archives.”

3.Press PARAMETER [>>] to get the “SNG ArcTarget=” display, and use the TIME/VALUE dial to select the song that you wish to load.

To load the data of a single song, select Ò1 Song.Ó To load all the song data, select ÒAll.Ó

4.Press PARAMETER [ ] to get the “SNG Arc.Drive=” display, and use the TIME/VALUE dial to select the disk drive from which the data will be loaded.

Here we will read from a Zip drive, so select SC5:U.

5.Press PARAMETER [ ] to get the “SNG Arc.Func= display, use the TIME/VALUE dial to select “Extract.”

6.Insert a Zip disk into the Zip drive, and press [YES]. The display will ask “SNG Extract SC5:0?” If it is OK to copy the data, press [YES] twice. To cancel the opera- tion, press [NO].

In step 3, select Ò1 Song.Ó If two or more songs were saved to the Zip disk, the names of the saved songs will also be displayed. Use the TIME/VALUE dial to select the name of the song you wish to copy, and press [YES] twice.

7.The display will ask “Store Current?” If you wish to store the current song, press [YES]. If you decide not to store, press [NO].

8.If you have selected “All” in step 3, the display will ask “Init. IDE:0 OK?” This message is asking you to confirm that you wish to initialize the loading destination drive (the internal hard disk). If you wish to initialize the drive and then load, press [YES]. If you decide not to initial- ize, press [NO].

*If at this point you press [YES], all songs saved on the internal hard disk will be lost. Normally you should press [NO]. If the loading destination hard disk does not have sufficient space, you should first make a backup copy of the internal hard disk, and then press [YES].

9.Loading will be executed. If the copy operation involved two or more disks, the disk will be ejected, and you will be prompted to “PleaseInsertDisk.” Insert the next disk and press [YES].

When the data has been loaded correctly, you will return to Play condition.