Chapter 1 Trying out the expanded functions
Chapter 1
2.Press [SELECT].
The mixer mode will change to INPUT MIX/TRACK MIX. At the same time, the display will indicate ÒShift Unlock,Ó indicating that Shift Lock has been canceled.
< If [SHIFT] is held down during an operation >
If [SHIFT] is held down during an operation, the Shift Lock function will be ignored. For example if you hold down [SHIFT] and press [SELECT], Shift Lock will not be turned on when you take your finger off [SHIFT]. The function of [SHIFT] itself remains in effect, so the mixer mode will change if you hold down [SHIFT] and press [SELECT].
■Easy time adjustment
It is now possible to change only the desired decimal places of a number that you wish to change, such as when specify- ing the range for Track Copy or when modifying the time of a Locate Point.
Example procedure when modifying a Locate Point
*If a particular Locate Point has not been specified, the dis- play will indicate Ò- - h - - m - - s -
Suppose that you wish to change the time of Locate Point 1 to Ò01h00m00s00Ó.
1.Press [LOCATOR] several times until “LOC Loc1 ✱✱ h ✱✱ m ✱✱ s ✱✱” appears (numbers will be displayed in
✱✱).
CONDITION MARKER# | TIME | ||||
|
|
|
|
|
|
dB
0
4
12
24
48
INPUT TRACK | AUX MASTER |
2.Hold down [SHIFT] and press CURSOR[ 
].
The cursor will appear at the lowest decimal place.
3.Hold down [SHIFT] and press CURSOR[ 
][ 
].
The cursor will move. Move the cursor to the desired decimal place.
4.Rotate the TIME/VALUE dial to modify the number.
5.Press [PLAY(DISPLAY)].
You will return to Play condition.
45
